Particle Measuring Systems LASAIR II 550L Operator's Manual


Communications Setup Screens (Comm Setup)Communications Setup Screens (Comm Setup)
LASAIR II Operator’s ManualLASAIR II Operator’s Manual
PagePage
5-235-23
Network ParametersNetwork Parameters
Net AddrNet Addr Sets the IP address of this unique LASAIR II in a decimal notationSets the IP address of this unique LASAIR II in a decimal notation
form of aaa.bbb.ccc.ddd. Each 3-numeric series represents a value from 0–255form of aaa.bbb.ccc.ddd. Each 3-numeric series represents a value from 0–255,,
separated by period characters (.). This address is unique to separated by period characters (.). This address is unique to the hardware itthe hardware it
serves. A valid IP address would look like: “010.255.000.099”. The non-serves. A valid IP address would look like: “010.255.000.099”. The non-
significant zeros can be dropped so that significant zeros can be dropped so that the same address appears asthe same address appears as
10.225.0.99.10.225.0.99.
MaskMask Sets the net mask address using a Sets the net mask address using a decimal notation form ofdecimal notation form of
aaa.bbb.ccc.ddd. Each 3-numeric series represents a value from 0–255,aaa.bbb.ccc.ddd. Each 3-numeric series represents a value from 0–255,
separated by period characters “.”. The mask separates the network addressseparated by period characters “.”. The mask separates the network address
from the host address. Usually, the mask will be similar to “255.255.255.0”.from the host address. Usually, the mask will be similar to “255.255.255.0”.
YYour network administrator will tell your network administrator will tell you if you ou if you need to enter need to enter this field.this field.
GatewayGateway
Used when communicating across networks. The gateway addressUsed when communicating across networks. The gateway address
is a decimal notation form of nnn.nnn.nnn.nnn. Each 3-numeric seriesis a decimal notation form of nnn.nnn.nnn.nnn. Each 3-numeric series
represents a value of 0–255, separated by prepresents a value of 0–255, separated by period characters “.”. An example oferiod characters “.”. An example of
a valid gateway address is: “10.255.0.60”.a valid gateway address is: “10.255.0.60”.
MulticastMulticast Required when using Pharmaceutical Net or Facility Net software.Required when using Pharmaceutical Net or Facility Net software.
The multicast address in a decimal notation form of aaa.bbb.ccc.ddd. EachThe multicast address in a decimal notation form of aaa.bbb.ccc.ddd. Each
3-numeric series represents a value from 03-numeric series represents a value from 0
––
255, separated by period characters255, separated by period characters
(.). An example of a valid multicast address is: 224.10(.). An example of a valid multicast address is: 224.100.100.1.0.100.1.
Enable Web ServerEnable Web Server The default setting is Enabled; note the check mark inThe default setting is Enabled; note the check mark in
the box. It allows a user to connect to the LASAIR II from a computer.the box. It allows a user to connect to the LASAIR II from a computer.
Disabling this function prevents remote control and viewing of sampling.Disabling this function prevents remote control and viewing of sampling.
Enable TCP/IPEnable TCP/IP
The default setting for this field is Enable; note the checkThe default setting for this field is Enable; note the check
mark in the box. It allows a umark in the box. It allows a user to connect to Facility/Pharmaceutical Net.ser to connect to Facility/Pharmaceutical Net.
Disabling this function prevents the use of these applications.Disabling this function prevents the use of these applications.
TCP/IP Remote ModeTCP/IP Remote Mode
The default setting is “disabled”. Checking this boxThe default setting is “disabled”. Checking this box
enables Facility Net to download data enables Facility Net to download data stored in the LASAIR II rather thanstored in the LASAIR II rather than
sampling data collected on-line. See “Preparing sampling data collected on-line. See “Preparing LASAIR II for use in RemoteLASAIR II for use in Remote
Mode” on pageMode” on page 7-7 for additi7-7 for additional details. “Enable onal details. “Enable TCP/IP” must alsTCP/IP” must also beo be
checked to enable this function.checked to enable this function.
NOTE:NOTE: Before editing this screen we recommend that you record and save theBefore editing this screen we recommend that you record and save the
initial values as received initial values as received from the factory.from the factory.
Comm Setup - Serial ScreenComm Setup - Serial Screen
To open the Comm Setup - Serial Screen:To open the Comm Setup - Serial Screen:
From any screen under Comm Setup, press theFrom any screen under Comm Setup, press the Screen SelectScreen Selectsoftkey.softkey.

Particle Measuring Systems LASAIR II 550L Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 550L
Category	Measuring Instruments
Language	English