Particle Measuring Systems LASAIR II 550L Operator's Manual


Page Page 10-4 10-4 LASAIR LASAIR II II Operator’s Operator’s ManualManual
Chapter 10: MaintenanceChapter 10: Maintenance
If it is important to maintain the maximum correlation between the If it is important to maintain the maximum correlation between the batterybattery
charge indicator and the actual battery charge, you charge indicator and the actual battery charge, you can also purchase and use can also purchase and use thethe
optional external battery charger (BC II). See Appendix K, optional external battery charger (BC II). See Appendix K, "Accessories and"Accessories and
Supplies". When the BC II senses the Supplies". When the BC II senses the need, it will automatically recondition theneed, it will automatically recondition the
batterybattery. When reinstalled, the reconditioned battery will communicate the. When reinstalled, the reconditioned battery will communicate the
correct charge level to correct charge level to the battery charge indicator.the battery charge indicator.
Battery DisposalBattery Disposal
At end-of-life, batteries should be recycled At end-of-life, batteries should be recycled or discarded safely. Discarding batteriesor discarded safely. Discarding batteries
in unsorted waste is improper disposal, and may in unsorted waste is improper disposal, and may be harmful to the environment andbe harmful to the environment and
human health. Your local waste authority will have information on return andhuman health. Your local waste authority will have information on return and
collection systems in your area.collection systems in your area.
For California consumers, contact Particle Measuring Systems, Customer ServiceFor California consumers, contact Particle Measuring Systems, Customer Service
Department at (877)-475-3317 for instructions on returning used, rechargeableDepartment at (877)-475-3317 for instructions on returning used, rechargeable
batteries for reuse, recycling, or proper disposal at no cost.batteries for reuse, recycling, or proper disposal at no cost.
CalibrationCalibration
Calibration should be performed once each year. LASAIR II performs aCalibration should be performed once each year. LASAIR II performs a
calibration date check each time it is energized. If the current date is within 30calibration date check each time it is energized. If the current date is within 30
days or less of the anniversary of the last calibration, a days or less of the anniversary of the last calibration, a warning message will bewarning message will be
displayed.displayed.
The warning is displayed only The warning is displayed only on the main LCD on the main LCD displaydisplay. It is not shown . It is not shown on theon the
WWeb server. If the calibration date past eb server. If the calibration date past due, (365 days due, (365 days since the last calibrationsince the last calibration
date), the message will include the number of days the calibration is past due.date), the message will include the number of days the calibration is past due.
The instrument also notifies the user if no calibration date is saved.The instrument also notifies the user if no calibration date is saved.
Figure 10-1: Calibration Warning Dialog BoxFigure 10-1: Calibration Warning Dialog Box

Particle Measuring Systems LASAIR II 550L Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 550L
Category	Measuring Instruments
Language	English