Particle Measuring Systems LASAIR II 550L Operator's Manual


Display ScreensDisplay Screens
LASAIR II Operator’s ManualLASAIR II Operator’s Manual
PagePage
3-53-5
Main Display ScreenMain Display Screen
TheTheMain Display ScrMain Display Screeneenappears when the LASAIR II is turned on. If you areappears when the LASAIR II is turned on. If you are
viewing any other screen and press the Up Arrow softkey, you will eventuallyviewing any other screen and press the Up Arrow softkey, you will eventually
arrive at the Main arrive at the Main displaydisplay..
Display Layout —Display Layout — The Main Display Screen is divided The Main Display Screen is divided into four areas:into four areas:
••
A top reporting banner that displays the location, A top reporting banner that displays the location, date, run-time status, anddate, run-time status, and
time.time.
•• A sampling data area with a A sampling data area with a table of the particle size channels and table of the particle size channels and relatedrelated
particle counts.particle counts.
•• A bottom reporting banner with status information on the battery, pump,A bottom reporting banner with status information on the battery, pump,
laser, password, and communications.laser, password, and communications.
•• A column of navigation or editing A column of navigation or editing icons on the far right of the screen.icons on the far right of the screen.
NOTE:NOTE:
The display is real time; it shows changing particle counts as a The display is real time; it shows changing particle counts as a samplesample
is run. While sampling, real-time values of the following parameters areis run. While sampling, real-time values of the following parameters are
displayed:displayed:
•• Sampling time or delay timeSampling time or delay time
•• Flow rateFlow rate
Figure 3-1: Main Display ScreenFigure 3-1: Main Display Screen
Bottom reporting bannerBottom reporting banner
Softkey iconsSoftkey icons
TTop reporting op reporting bannerbanner
Password set when BluePassword set when Blue
Blue whenBlue when
communicatingcommunicating
remotely or withremotely or with
Facility NetFacility Net

Particle Measuring Systems LASAIR II 550L Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 550L
Category	Measuring Instruments
Language	English