Particle Measuring Systems LASAIR II 550L Operator's Manual


Setting Up the Display ScreensSetting Up the Display Screens
LASAIR II Operator’s ManualLASAIR II Operator’s Manual
PagePage
3-93-9
To view the Analog Data Display Screen, press the softkey to the right ofTo view the Analog Data Display Screen, press the softkey to the right of
the Analog Data display icon (fourth icon). A sample Analog Data displaythe Analog Data display icon (fourth icon). A sample Analog Data display
screen is shown below.screen is shown below.
Analog Data Display Layout —Analog Data Display Layout — The Analog Data Display Screen isThe Analog Data Display Screen is
divided into the following areas:divided into the following areas:
••
Data AreaData Area
: When sampling is first started, no data is shown. As da: When sampling is first started, no data is shown. As data ista is
generated, it is displayed. When the sample is generated, it is displayed. When the sample is complete, these results willcomplete, these results will
remain on display until the next sample is started. At that time, the remain on display until the next sample is started. At that time, the columnscolumns
will reset to zero in preparation for the next will reset to zero in preparation for the next set of analog data.set of analog data.
••
TTop and Bottop and Bottom Bannersom Banners
: See Figure 3-3 above. The information: See Figure 3-3 above. The information
displayed in the banners are identical to those in the Main Display Screen.displayed in the banners are identical to those in the Main Display Screen.
See FiguSee Figurere 3-1, “M3-1, “Main Disain Display Scrplay Screen,” on peen,” on pageage 3-5.3-5.
Setting Up the Display ScreensSetting Up the Display Screens
The display screens show a great deaThe display screens show a great deal of data. Parameters for the data reportedl of data. Parameters for the data reported
on these screens are set on several setup menus.on these screens are set on several setup menus.
The table below is a reference The table below is a reference that lists display items and the setup menu to that lists display items and the setup menu to useuse
for alterations. Any item that has more information on another display is alsofor alterations. Any item that has more information on another display is also
listed.listed.
Figure 3-3: Analog Data Display ScreenFigure 3-3: Analog Data Display Screen
CurrentCurrent
valuevalue
Average valueAverage value
over the entireover the entire
sample periodsample period
TTop reporting op reporting bannerbanner
MeasurementMeasurement
unitsunits
Name of theName of the
environmentalenvironmental
valuevalue
Bottom reporting bannerBottom reporting banner

Particle Measuring Systems LASAIR II 550L Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 550L
Category	Measuring Instruments
Language	English