Particle Measuring Systems LASAIR II 550L Operator's Manual


Page Page 8-14 8-14 LASAIR LASAIR II II Operator’s Operator’s ManualManual
Chapter 8: Statistics ModeChapter 8: Statistics Mode
When Using Auto-incrementing of LASAIR II LocationWhen Using Auto-incrementing of LASAIR II Location
Names/NumbersNames/Numbers
When the first sample is When the first sample is complete, the following dialog complete, the following dialog box will display.box will display.
To continue sampling:To continue sampling:
11 Record a description of where the first sample occurred. Example: “#001-Record a description of where the first sample occurred. Example: “#001-
Ballroom 1, column 12a.”Ballroom 1, column 12a.”
22
Move the LASAIR II to the next Move the LASAIR II to the next location.location.
33 Acknowledge the dialog box by pressing theAcknowledge the dialog box by pressing theEnterEnterbutton.button.
NOTE:NOTE: On theOn theMain DisMain Displayplay, observe that LASAIR II increments the location, observe that LASAIR II increments the location
to the next number in sequence. Example: from “#001” to “#002.”to the next number in sequence. Example: from “#001” to “#002.”
44
Start the next sample by pressing theStart the next sample by pressing the StartStartbutton.button.
55 Repeat steps 1–4 until the LASAIR II indicates that all samples are complete.Repeat steps 1–4 until the LASAIR II indicates that all samples are complete.
NOTE:NOTE: If auto-incrementing locationIf auto-incrementing location
names is not being used, ensure that names is not being used, ensure that therethere
are enough locations names to enable eachare enough locations names to enable each
sample location to have its own uniquesample location to have its own unique
name. If there are insufficient locationname. If there are insufficient location
names, LASAIR II will display an errornames, LASAIR II will display an error
message and default tomessage and default toAuto-incrementingAuto-incrementing
of LASAIR II-generated location numbersof LASAIR II-generated location numbers..
See “LocatSee “Location Name Setion Name Setup Screen” on pageup Screen” on page 5-8.5-8.
Ensure that the actual sampling location matches the Ensure that the actual sampling location matches the location name. LASAIR IIlocation name. LASAIR II
will increment the location names in the will increment the location names in the order that they are stored in the order that they are stored in the locationlocation
name listname liststartingstartingwith the location name highlighted in thewith the location name highlighted in the Sampling SetupSampling Setup
ScreenScreen. For example, if 10 location names exist, and sampling starts at the. For example, if 10 location names exist, and sampling starts at the
seventh name, sampling will proceed in the following order: 7, 8, 9, 10, 1, 2, 3,seventh name, sampling will proceed in the following order: 7, 8, 9, 10, 1, 2, 3,
4, 5, 6.4, 5, 6.

Particle Measuring Systems LASAIR II 550L Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 550L
Category	Measuring Instruments
Language	English