Particle Measuring Systems LASAIR II 550L Operator's Manual


4-20 mA Output4-20 mA Output
PagePage
J-3J-3
4-20 mA Output4-20 mA Output
LASAIR II (software version 1.4.0 or newer) supports 4-20 mA output. ThisLASAIR II (software version 1.4.0 or newer) supports 4-20 mA output. This
feature is enabled and configured from thefeature is enabled and configured from the 4-20 mA Out Setup Screen4-20 mA Out Setup Screen..
NOTE:NOTE: Use of this feature requires an optional 4-20 mA boUse of this feature requires an optional 4-20 mA board to be installedard to be installed
in the LASAIR II.in the LASAIR II.
If a board is installed, but the 4-20 mA feature is disabled, all outputs will be setIf a board is installed, but the 4-20 mA feature is disabled, all outputs will be set
to 4 mA.to 4 mA.
Figure J-1: 4-20 mA Output Setup ScreenFigure J-1: 4-20 mA Output Setup Screen

Particle Measuring Systems LASAIR II 550L Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 550L
Category	Measuring Instruments
Language	English