Particle Measuring Systems LASAIR II 550L Operator's Manual


4-20 mA Output4-20 mA Output
PagePage
J-5J-5
88
When the value is correct, press the Enter button When the value is correct, press the Enter button again to save the value again to save the value andand
disable the Field Edit Mode.disable the Field Edit Mode.
NOTE:NOTE:
TheThe
ScaleScale
value must be greater than zero.value must be greater than zero.
99 Use the Up and Down softkeys again to navigate to the next Scale Field youUse the Up and Down softkeys again to navigate to the next Scale Field you
want to edit.want to edit.
1010
Repeat steps 6–9 until all Scale Repeat steps 6–9 until all Scale fields have been correctly set.fields have been correctly set.
1111 Press the Enter button again to save the value and disable the Field Edit Mode.Press the Enter button again to save the value and disable the Field Edit Mode.
1212 Navigate to the Update button box by pressing the Forward TNavigate to the Update button box by pressing the Forward Tab softkeyab softkey..
1313
Use the Right or Left softkeys to Use the Right or Left softkeys to highlighthighlight ContinuousContinuousororEnd of End of SampleSampleoutput.output.
1414 Press the Enter softkey to enable the oPress the Enter softkey to enable the option you want.ption you want.
1515
Repeat steps 12–14 to set each of the remaining buttons to the neededRepeat steps 12–14 to set each of the remaining buttons to the needed
configuration.configuration.
1616 When all settings are correct, press the Return Arrow softkeyWhen all settings are correct, press the Return Arrow softkey to disableto disable
Edit Mode.Edit Mode.
4-20 mA Output Connector Wiring and 4-20 mA Output Connector Wiring and Channel DefinitionsChannel Definitions
The connector is labeled with pin 1 and pin 16.The connector is labeled with pin 1 and pin 16.
CChhaannnneell OOuuttppuutt RReettuurrnn DDeeffiinniittiioonn
CChhaannnneel l 11 11 22 SSttaattuus s aannd d aallaarrm m iinnffoorrmmaattiioonn
CChhaannnneel l 22 33 44 MMaanniiffoolld d ppoossiittiioonn
CChhaannnneel l 33 55 66 PPaarrttiicclle e cchhaannnneel l 1 1 ((ssmmaalllleesst t ssiizzee))
CChhaannnneel l 44 77 88 PPaarrttiicclle e cchhaannnneel l 22
CChhaannnneel l 55 99 1100 PPaarrttiicclle e cchhaannnneel l 33
CChhaannnneel l 66 1111 1122 PPaarrttiicclle e cchhaannnneel l 44
CChhaannnneel l 77 1133 1144 PPaarrttiicclle e cchhaannnneel l 55
CChhaannnneel l 88 1155 1166 PPaarrttiicclle e cchhaannnneel l 6 6 ((llaarrggeesst t ssiizzee))
CCoonnnneeccttoor r TTyyppee:: MMoolleexx® ® 4433002255--11660000
TTeerrmmiinnaal l PPiinnss:: MMoolleex x 4433003300--00000077
WWiirriinng g GGaauuggee:: 2200––224 4 AAWWGG
Hand-held crimping toolHand-held crimping tool
aa
::
a.a. For detaiFor details about hols about how to producw to produce a good crimp we a good crimp with thisith this
tool, see www.molex.tool.tool, see www.molex.tool.
Molex Part No. Molex Part No. 6381163811-2800-2800

Particle Measuring Systems LASAIR II 550L Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 550L
Category	Measuring Instruments
Language	English