27
New Password:
12345
Time
hrs/min 1230
Change without
vend ?
Multivend ?
Unit Scaling
Factor 001
Activate
Deposit ?
N Check inhibited on deposit value.
Y Deposit value is checked. When a key has been inserted with a
deposit programmed, the credit will be displayed – with the deposit
value decreased – only after charging the key with a higher value
than the deposit value.
Press
to confirm the current password, or enter the new password
and then press
to confirm.
Max. value: 65535.
Set date: day, month, year.
Set time: hours, minutes.
See Fn07 to manage summer time.
Fn01 – Parameters change and Unit Scaling Factor (USF)
This is the smallest credit unit transmitted to the VM in Serial protocol.
Enter the value of the smallest coin accepted.
USF in EURO = 001
Max. value with Executive protocol = 255.
N Standard (it is necessary to make a vend).
Once money has been inserted, the system won’t give it back; change
is only given after a vend.
Y The system will give back the money inserted without a vend (money
changer), provided that such amount is equal to or lower than the max.
change that can be given.
Press the opening lever to get money back.
NOTE: the system stops giving change when tubes reach the empty
level.
N Single vend.
Y Multivend.
Single vend Change is automatically given after a vend (no max. value), until no more coins
are left in tubes. The max. credit cash that can be inserted corresponds to the
value of the max. price (see Fn04).
You can enter a value as max. change (see next option).
Multivend Change is given when pressing the Escrow lever after one or more vends. Such
operative mode enables customers to make more selections and get their change
manually. The max. credit accepted is programmed in Fn00.
See Fn24 to adjust the speed of Escrow lever.
Date
dd/mm/yy 010914
To Next Page
Loading...