Paytec Eagle - Fn24 - Technical Support

88
Use rapid
Escrow ?
Discrimination
extended ?
Reset acceptance
counters ?
Fn24 – Technical support
This function contains parameters reserved to the technical staff of Paytec.
Before you modify standard settings, please contact Paytec Customer Service.
N Standard setting.
Y Rapid escrow.
Example
In some Vending Machines, the Escrow lever is activated by an
automatic device (see motor or electromagnets). The lever might be
activated for a short time (e.g. when controlled by an electromagnet); in
this case the activation of the lever will be useless to give change
manually or eject coins.
Select ‘Y’ to increase lever speed.
N Standard setting.
Coins are accepted following the configuration saved (see Fn03 “Delta
parameters”).
Y Coins are accepted with broader deltas. ‘Deltas’ are not modified in Fn03
but they are dynamically controlled when inserting coins.
N Standard setting.
Y Reset coin acceptance counters (contact Paytec before you decide to
select this option).