Paytec Eagle - Fn30-33 Black List; Fn30 - Enter Code in Black List; Fn31 - Delete Code from Black List

65
Disable user
code: 0
User code:
0
Search user
code
: 0
Confirm
reset ?
Black List max.
elements: 50
0
Fn30-33 Black List
ServiceKeys and keys that have gone lost can be inhibited here to prevent unauthorized use. Enter the user code
in the Black List and the key will no longer be accepted.
All the keys circulating in a location must be programmed with different user codes (and all systems must contain
a Black List). The Black List can contain up to 500 codes.
The user code must be a number between 1 and 32767.
Fn30 – Enter code in Black List
Enter the key code that must be inhibited, then press

to confirm.
Enter all the codes you wish to inhibit.
When a code has already been written in the Black List, the message " User code … already disabled" is
displayed.
When the Black List is full, the message "Black List full" is displayed: no more codes can be written.
Reset the Black List in Fn33 when compiling the Black List for the first time (the starting memory must be
empty).
Fn31 – Delete code from Black List
Enter the code of the key you wish to re-enable, then press

to confirm.
When a code is not present in the Black List, the message "User Code …
not found " is displayed.
If the Black List is empty, the message “Black List empty” is displayed.
Fn32 – View code in Black List
Only-read value: max. number of codes a Black List can contain.
If you wish to read the whole Black List from the beginning, press

and
then

to scroll down the list (next).
Press

to scroll up the list (back).
If you are searching a single code, enter the key code and press

; if the
code is present in the list, the system will start reading from that code.
If the Black List is empty, the message “Black List empty” is displayed.
Fn33 – Reset Black List
Enter Y, then press

if you wish to reset the Black List.