Paytec Eagle - General Warning

3
The information contained in this manual is subject to change without prior notice and is not binding for Payment
Technologies S.r.l.
This document contains information on property, all rights reserved. No part of this document should be copied,
transmitted, stored, or translated into another language without prior written consent by Payment Technologies
S.r.l., except where allowed by local laws.
The configuring instructions described in this document are valid for the programming tool P6000 or the APP
PayTools (P6000 Emulator mode) on Smartphone Android
™
(get it on Google Play Store)
If you wish to configure functions with a PC, you can use our software “Paytec Configurator” (available for
Windows and Smartphone Android; the application “Configurator ”is also present in the APP PayTools).
This document does not contain the instructions for the use of Paytec Configurator (download the dedicated user
guide from www.paytec.eu).
For connection to a PC you need a USB cable.
General warning
• Read this guide carefully before use.
• This guide is valid for the model EAGLE – Changegiver.
• Before the changegiver is installed, check voltage compatibility with the Vending Machine (VM). Read the
nominal voltage rates on labels (tolerance ± 10%).
• EAGLE has been designed for internal electrical equipment for Vending Machines.
• Do not use in water or near liquids where it might become wet.
• Do not use near smoke or inflammable gases.
• Cut power before maintaining electrical and/or mechanical components.
• Dispose of the device in accordance with environmental laws (DO NOT burn).
• Always read labels.
• Do not tie the system main cables or cables belonging to Slave units.
• Periodically check whether cables are correctly plugged on their connectors.
• Do not use extension cables.
• Cut power before maintaining and/or cleaning the unit.
• Use a damp cloth to clean plastic elements.
• Keep the coin chute clean.