34
Executive Price Holding - List 10 prices
Prices are controlled by the changegiver EAGLE. In this case, each price (with its discount) is associated with a
selection number.
You can have different selection numbers with the same price but different discounts.
Settings are indicated in table 1.
Table 1
Fn00
" Executive Protocol ? "
" Price Holding mode ? "
" Send price to VMC ? "
Y
Y
Y/N
Executive protocol enabled.
Price Holding mode enabled.
( See below )
∗
Fn01 " Unit Scaling Factor " 001
Enter 1 (up to 64 selections available).
Fn04
" 1^ Price value: - - - - - "
" 1^ Pr./Disc. 1 value: - - - - - "
Enter up to 10 prices (match each price to a
selection).
Enter up to 4 discounts for each price
(depending on the key type in use).
Fn17
" Selection number
(1 – 64) 1 "
" 1^ Selection
price line no. - - "
Enter selection no. on the VM (64 selections
max.)
Enter the price number (1 to 10) you wish to
associate with a selection number.
∗
Send price to VMC – Enter “Y” to display prices when a pressing a selection button but no money has
been inserted yet. Prices can be thus checked on display before a purchase is made.
Executive Price Holding - List 100 prices
Up to 100 prices (extended memory). This option is useful for those VMs with a high number of selections.
All 100 prices are set in Fn04 (price number = selection number) and you don’t have to set parameters in Fn17.
In this case one discount is only given for each price.
Settings are indicated in table 2.
Table 2
Fn00 - Fn01
See table 1
Set as indicated in table 1
Fn19
" 100 selections ? "
" Reset prices and discounts? "
" Confirm reset ? "
Y
Y
Y
List 100 prices enabled.
The current List 10 prices is reset.
Reset is confirmed.
Fn04
" 1^ Price value: - - - - - "
" 1^ Pr./Disc. 1 value: "
Enter up to 100 prices.
Enter a discount for each price.
Audit is extended to 100 prices.