Paytec Eagle - Page 39

To Next Page

To Previous Page

PIN 1 (Personal Identification Number).

If you wish to modify PIN 1, enter the current PIN (***** is displayed on the

P6000) and press



to confirm; then enter the new PIN1 and press



again

to confirm.

PIN 2 (the same instructions are valid as for PIN1).

PIN 1 + PIN 2 give a 10-digit password for max. security.

If you prefer a 5-digit password, instead, leave PIN 2 on 00000 (the system

will recognize keys with PIN1 only).

If you wish to make PINs harder to decrypt, read the paragraph about Security (Fn10) in the present guide.

For more info, please contact Paytec Customer Service.

N Multivend. More purchases can be made after the key has been inserted.

Credit on the key is reduced after each purchase.

Y Single vend. The key must be pulled out after each purchase (wait till the

green LED is ON).

If the key is not pulled out after a purchase, no more purchases can be made.

N Max. credit is NOT checked on keys (keys are accepted when containing a

credit up to 65535).

Y Max. credit IS checked on keys. Keys are not accepted when recharged with

a credit 50% higher than the max. credit programmed in Fn00 (coins are still

accepted but credit in not loaded on keys).

EURO systems : select "N"

N Keys are accepted by any credit amount on them.

Y Keys are only accepted when containing a credit which is a multiple of 5.

Warning: if this option has been set on “Y”, prices and discounts must be a

multiple of 5, too (otherwise keys are no longer accepted after the first

purchase).