Paytec Eagle - Page 47

47
Enter the value of Fidelity points required for each price.
Enter the number of Fidelity points loaded on the key for each price.
ABOUT FIDELITY CREDIT/POINTS
Fidelity with credit
When inserting the key…
1. When the validity period for Fidelity credit has expired since last vend with Fidelity credit, the amount of Fidelity
credit remaining on the key is reset.
2. Fidelity credit on the key is displayed for 2 seconds in “Fxx,xx” format. After that, standard credit is displayed.
3. Executive protocol : when Fidelity credit on the key is higher than “0” (zero), the amount is transmitted to the
VM and displayed for 2 secs. After that, standard credit is displayed.
When making a purchase…
When the price of the product selected is lower than/equal to the total Fidelity credit on the key...
1. Fidelity credit on the key is reduced by the price of the product selected.
2. The current date is stored on the key as the date when Fidelity credit was last used.
When the price of the product selected is higher than the total Fidelity credit on the key...
1. The purchase is paid with the standard credit on the key.
2. Fidelity credit on the key is increased by the Fidelity credit associated with the selection made.
Fidelity with points
When inserting the key…
1. When the validity period for Fidelity points has expired since last vend with Fidelity points, the amount of
Fidelity points remaining on the key is reset.
2. The total Fidelity points on the key is displayed for 2 secs. in “Fxxxx” format. After that, standard credit is
displayed.
3. Executive protocol: when the total Fidelity points on the key is higher than “0” (zero), the amount is transmitted
to the VM and displayed for 2 seconds. After that, standard credit is displayed.
When making a purchase…
When the number of points required for the product selected is higher than “0” (zero) but lower than/equal to the
total Fidelity points on the key...
1. The total Fidelity points on the key is reduced by the number of points required for the product selected.
2. The current date is stored on the key as the date when Fidelity points were last used.
When the number of points required for the product selected is higher than the total Fidelity points on the key...
1. The vent is paid with the standard credit on the key.
2. The total Fidelity points on the key is increased by the number of points given for the product selected.
1^ Fidel/Pr
ice
points:
1^ Fidel
ity
points: