Pentair FLECK 5800 SXT - Volume Since Last Regeneration (VU); Reserve Capacity (RC); Totalizer (TV); Software Version (SV)

Installer Manual Fleck 5800 - SXT - Programming
62 / 92 Ref. MKT-IM-004 / A - 18.04.2017
6.7.5. Volume since last regeneration (VU)
Note
Shows the volume used since the last regeneration (L).
6.7.6. Reserve capacity (RC)
Note
Shows the remaining reserve volume until next regeneration (L).
6.7.7. Totalizer (TV)
Note
Shows the total volume used (L).
6.7.8. Software version (SV)
Note
Shows the version of the software used by the controller.
D Volume since last regeneration display (L or Gal depending on display
format programmed).
E Volume until next regeneration display (L or Gal depending on display
format programmed).
F Totalizer display (L or Gal depending on display format programmed).
G Software version display: