101
Shooting Functions
4
4
Use the four-way controller (23) to select [Setting] and
press the four-way controller (5).
The screen to set the noise reduction level according to the sensitivity
appears.
5
Use the four-way controller (23)
to select a sensitivity value and
use the four-way controller (45)
to set the level of noise reduction
which is applied to the selected
sensitivity.
Turn the e-dial to display the [High-ISO
NR 2] screen.
Press the | button to reset the settings.
The sensitivity values displayed vary according to the [1. EV Steps] and
[2. Sensitivity Steps] settings made in the [A Custom Setting 1] menu
(p.89).
6
Press the 3 button.
The screen that was displayed in Step 2 appears again.
7
Press the 3 button twice.
The camera is ready to take a picture.
MENU
100
ISO
200
ISO
400
ISO
1600
ISO
3200
ISO
6400
ISO
800
ISO
1 2
ISO
NR
OFF
ISO
NR
OFF
ISO
NR
OFF
ISO
NR
ISO
NR
ISO
NR
ISO
NR
High-ISO NR
Reset
To Next Page
Loading...
