204
Shooting Settings
6
8
Press the 4 button.
The camera is ready to take a picture.
You can fine-tune the white balance setting.
1
Perform the desired setting in Step 3 on p.201.
2
Press the four-way controller (5).
The fine-tuning screen appears.
3
Fine-tune the white balance.
Seven levels (225 patterns) are available
on the G-M and B-A axes.
Available operations
• No image is recorded when the shutter release button is pressed to adjust
the white balance.
• The message [The operation could not be completed correctly] appears
when measuring is unsuccessful. Press the 4 button while displayed to
remeasure the white balance.
• If a picture is extremely overexposed or underexposed, the white balance
may not be adjusted. In this case, adjust exposure to the correct amount level
before adjusting the white balance.
• When the mode dial is set to C (Movie), the white balance cannot be
measured. Adjust the white balance in any capture mode other than C
before recording a movie.
Fine-Tuning the White Balance
Four-way controller (23) Adjusts the tone of the colors between
green (G) and magenta (M).
Four-way controller (45) Adjusts the tone of the colors between
blue (B) and amber (A).
| button Resets the adjustment value. (Available
only when [Green Button] is assigned to |
button in [Green Button] of the [A Rec.
Mode 4] menu (p.197).)
Shade
MENU
GG
BBA
A
MM
G1 ±0
±0
Cancel Check OK
OK
To Next Page
Loading...
Need help?
General
Weight and Dimensions
