195
Shooting Settings
6
You can set the format of image files.
1
Press the M button in the status screen.
The control panel appears.
Press the M button when the status screen is not displayed.
2
Use the four-way controller
(2345) to select [File Format]
and press the 4 button.
The [File Format] screen appears.
Setting the File Format
JPEG
Captures images in JPEG format (default setting).
You can change the number of recorded pixels in [JPEG Recorded
Pixels], and the image quality level in [JPEG Quality].
RAW
RAW format is a CMOS sensor output format saved without processing.
Effects of White Balance, Custom Image and Color Space are not
applied to the captured images, but they are saved as actual original
information. When you perform the development process by using RAW
Development function (p.259), or using the provided software (PENTAX
Digital Camera Utility 4) after transferring RAW data to a computer, you
can create JPEG images with these effects.
RAW+
Images are saved in both RAW and JPEG formats.
When [One Push File Format] is assigned to the | button, you can press
the | button to temporarily change the file format and save an image in
both file formats. (p.198)
When Digital Filter, HDR Capture or Cross Processing is set, the file format is
fixed to [JPEG] and cannot be changed. To change the file format, turn these
functions off.
12M
[
37
]
JPEG
HDR
OFF
OFF
AF.A
File Format
OFF
To Next Page
Loading...
Need help?
General
Weight and Dimensions
