269
Changing Additional Settings
9
Setting the Beep, Date and Time, and
Display Language
You can turn the camera operation beep on or off, or change its volume.
By default, all available items are set to O (On), and the volume level is
set to [3]. The following six items can be set.
• In-focus
• AE-L (AE Lock operation sound)
•Self-timer
• Remote Control
• One Push File Format (operation sound when [One Push File Format]
is assigned to the | button)
• Press OK for 1 sec. (operation sound when changing AF point is
enabled or disabled)
1
Select [Beep] in the [R Set-up 1] menu and press the four-
way controller (5).
The [Beep 1] screen appears.
2
Press the four-way controller (3) and use the four-way
controller (45) to adjust the volume.
Select from six levels. When set to 0, you can turn all the beeps off.
3
Use the four-way controller (23)
to select an item.
Turn the e-dial to display the [Beep 2]
screen.
4
Use the four-way controller (45) to select O (On) or
P (Off).
5
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
Setting the Beep
Beep
Volume
In-focus
AE-L
Self-timer
Remote Control
One Push File Format
MENU
1 2
To Next Page
Loading...
