Pentax K-r - Setting the Initial Menu Tab Displayed

275
Changing Additional Settings
9
Set the initial menu tab displayed on the monitor when the 3 button
is pressed.
1 Select [19. Save Menu Location] in the [A Custom Setting
3] menu and press the four-way controller (5).
The [19. Save Menu Location] screen appears.
2 Use the four-way controller (23)
to select [Reset Menu Location]
or [Save Menu Location] and
press the 4 button.
3 Press the 3 button.
The screen that was displayed before selecting the menu appears again.
Setting the Initial Menu Tab Displayed
1 Reset Menu Location
The [A Rec. Mode 1] menu ([Q Playback
1] menu in Playback mode) is always
displayed first. (default setting)
2 Save Menu Location The menu tab last selected is displayed first.
19.
1
2
Save Menu Location
Reset Menu Location
Save Menu Location
Pressing the menu button
Cancel
MENU
accesses the last used
menu tab
OK
OK