43
Getting Started
2
Inserting the Battery
Insert the lithium-ion battery or AA batteries into the camera.
Use the exclusive battery D-LI109.
When using the battery for the first time, or when the battery has not been
used in a long time, or when [Battery depleted] appears, recharge the
battery.
Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible
cord, rated 125 V, 7A, minimum 6ft (1.8m)”
1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
Using the Lithium-ion Battery
Charging the Battery
Indicator lamp
Battery charger
AC plug cord
To Next Page
Loading...
