325
Appendix
11
Error Messages
Error Message Description
Memory card full
The SD Memory Card is full and no more
images can be saved. Insert a new SD Memory
Card or delete unwanted images. (p.52, p.84)
Data may be saved when you perform the
following operations.
• Change the file format to JPEG. (p.195)
• Change the JPEG Recorded Pixels or JPEG
Quality setting. (p.192, p.193)
No image
There are no images that can be played back
on the SD Memory Card.
This image cannot be
displayed
You are trying to play back an image in a format
not supported by this camera. You may be able
to play it back on another brand of camera or
your computer.
No card in the camera
The SD Memory Card is not inserted in the
camera. (p.52)
Cannot use this card
The inserted SD Memory Card is not
compatible with this camera.
Memory card error
The SD Memory Card has a problem, and
image capture and playback are impossible. It
may be viewable on a computer but not with this
camera.
Card is not formatted
The SD Memory Card you have inserted is
unformatted or has been formatted on another
device and is not compatible with this camera.
Use the card after formatting it with this camera.
(p.268)
Card is locked
The write-protect switch on an SD Memory
Card you have inserted is locked. Unlock the
SD Memory Card. (p.53)
The card is
electronically locked
Data is protected by the SD Memory Card
security feature.
This image cannot be
enlarged
You are trying to enlarge an image that cannot be
enlarged.
This image is protected
You are trying to delete an image that is
protected. Remove protection from the image.
(p.240)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
