326
Appendix
11
Battery depleted
The battery is exhausted. Install a fully charged
battery or new AA batteries in the camera.
(p.43)
Not enough battery
power remaining
to clean sensor
Appears during sensor cleaning if the battery
level is insufficient. Install a fully charged
battery or new AA batteries, or use the AC
adaptor kit K-AC109 (optional). (p.50)
Not enough battery
power remaining to
activate Pixel Mapping
Appears during Pixel Mapping if the battery
level is insufficient. Install a fully charged
battery or new AA batteries, or use the AC
adaptor kit K-AC109 (optional). (p.50)
Image folder cannot be
created
The maximum folder number (999) and file
number (9999) are being used, and no more
images can be saved. Insert a new SD Memory
Card or format the card. (p.268)
Unable to store image
The image could not be saved because of an
SD Memory Card error.
Settings not stored
The DPOF settings could not be saved because
SD Memory Card is full. Delete unwanted
images and perform DPOF setting again. (p.84)
The operation could not be
completed correctly
The camera was unable to measure the manual
white balance or detect dust on the sensor. Try
the operation again. (p.202, p.316)
No more images can be
selected
You cannot select 100 or more images at a time
for Index (p.229) and Select & Delete (p.236).
No image can be processed
There are no images that can be processed
using Digital Filter (p.253) or RAW
Development (p.259) function.
This image cannot be
processed
Appears when you try to perform Resize
(p.250), Cropping (p.251), Digital Filter (p.253),
or RAW Development (p.259) for images
captured with other cameras, or when you try to
perform Resize or Cropping for minimum file
size images.
The camera failed to create
an image
The creation of an index print image failed.
(p.229)
Error Message Description
To Next Page
Loading...
Need help?
General
Weight and Dimensions
