262
Processing Images
8
Specify the parameters for developing RAW images.
The following parameters can be changed.
*1 This cannot be set for RAW files taken in Multi-exposure mode.
*2 This can be selected only when a compatible lens is attached. (p.211)
1
Press the four-way controller
(23) in Step 4 on p.259 to
choose the parameter you want
to change.
Specifying the Parameters
Parameter Value Page
Recorded Pixels
E (4288×2848)/J (3936×2624)/
P (3072×2048)/i (1728×1152)
p.192
Quality Level C (Best) / D (Better) / E (Good) p.193
Custom Image
Bright/Natural/Portrait/Landscape/Vibrant/
Muted/Bleach Bypass/Reversal Film/
Monochrome
p.213
White Balance
*1
F (Auto)/G (Daylight)/H (Shade)/
^ (Cloudy)/JD (Fluorescent Light Daylight
Color)/JN (Fluorescent Light Daylight
White)/JW (Fluorescent Light Cool White)/
JL (Fluorescent Light Warm White)/
I (Tungsten Light)/L (Flash)/f/
K (Manual)
p.200
Sensitivity -2.0 to +2.0 –
High-ISO NR Auto/Off/Low/Medium/High p.100
Shadow Correction Off/Low/Medium/High p.208
Distortion Correction
*2
Off/On p.211
Lat-Chromatic-Ab Adj
*2
Off/On p.211
Color Space sRGB/AdobeRGB p.205
MENU
12M
sRGB
RAW
JPEG
OK
100-0001
ISO
NR
File Format
To Next Page
Loading...
