Pentax K-r - Interval Shooting

151
Shooting Functions
4
During Interval Shooting, pictures are taken at a set interval from a set time.
1 Select [Interval Shooting] in the [A Rec. Mode 2] menu
and press the four-way controller (5).
The [Interval Shooting] screen appears.
2 Use the four-way controller (23)
to select [Interval].
When taking two or more pictures, set the
wait time until the next picture is taken.
Use the four-way controller (45) to
select the number of hours, minutes, and
seconds, and use the four-way controller
(23) to set the time.
You can set up to 24 hours, 00 minutes,
and 00 seconds.
3 Use the four-way controller ( 23 ) to select [Number of Shots].
Set the number of shots to be taken.
Press the four-way controller (45) and use the four-way controller
(23) to select the number of shots to be taken.
You can select between 1 and 999 shots.
4 Use the four-way controller (23) to select [Start Interval].
Set the time when the first picture is taken.
Press the four-way controller (5) and use the four-way controller (23)
to select [Now] or [Set Time].
Interval Shooting
• Interval Shooting is not available in the following situations.
- when the capture mode is set to C (Movie), or Z (Night Scene HDR) of
H (Scene) mode
- when the shutter speed is set to h
- when Digital Filter or HDR Capture is set
• When Interval Shooting is set, Multi-exposure is not available.
Now Shooting starts immediately. You can take two or more pictures.
Set
Time
Shooting starts at the set time. Press the four-way controller (3) to
select [Start Time], use the four-way controller (45) to select the
time, and use the four-way controller (23) to set the start time.
Interval Shooting
MENU
Start Shooting
Interval
Number of Shots
Start Interval
002images
Now
Start Time
Cancel OK
OK
00 00 00
:
'"