Pentax K-r - Taking Pictures Continuously

147
Shooting Functions
4
The shutter can be released from a distance by using the optional remote
control unit (p.323).
You can select from the following two settings for remote control shooting.
1 Mount the camera onto a tripod.
2 Press the four-way controller (2) in Capture mode.
The [Drive Mode] screen appears.
3 Use the four-way controller (45) to select h.
4 Press the four-way controller (3)
and use the four-way controller
(45) to select hor i.
The self-timer lamp will blink and the
camera is in a stand-by status.
5 Press the 4 button.
The camera is ready to take a picture.
Shooting with Remote Control (Optional)
h
Remote Control
The shutter is released immediately after the shutter
release button on the remote control unit is pressed.
i
Remote Control
(3s delay)
The shutter is released about 3 seconds after the shutter
release button on the remote control unit is pressed.
OK
MENU
Drive Mode
Cancel OK
Remote Control