146
Shooting Functions
4
6
Press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the
viewfinder when the subject is in focus.
7
Press the shutter release button
fully.
For g, the self-timer lamp starts blinking
slowly and blinks rapidly 2 seconds
before the shutter is released. The beep
is heard and the rate increases. The
shutter will be released about 12 seconds
after the shutter release button is pressed fully.
For Z, the shutter will be released about 2 seconds after the shutter
release button is pressed fully.
• The self-timer shooting is not available when the capture mode is set to \
(Moving Object) of Picture mode, and R (Kids) or Y (Pet) of H (Scene)
mode.
• Select a mode other than g or Z in the [Drive Mode] screen to cancel the
self-timer shooting. The setting is canceled when the camera is turned off if
[Drive Mode] is set to P (Off) in [Memory] (p.288) of the [A Rec. Mode 4]
menu.
• The Shake Reduction function is automatically turned off when g or Z is set.
• You can set the camera so that the beep does not sound. (p.269)
• The exposure may be affected if light enters the viewfinder. Use the AE Lock
function (p.120). The light entering viewfinder has no effect on the exposure
when the mode dial is set to a (Manual).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
