201
Shooting Settings
6
1
Set the mode dial to e, K, b, c, or a.
2
Press the four-way controller (4) in Capture mode.
The [White Balance] screen appears.
After the power is turned on, the last image taken is displayed in the
background.
3
Press the four-way controller
(23) to select the white balance.
Available operations
4
Press the 4 button.
The camera is ready to take a picture.
mc button Uses Digital Preview to preview the background
image with the setting applied.
M button Saves the background image. Select [Save as] and
press the 4 button.
Because the light source changes when a flash discharges, you can set the
white balance for when the flash discharges. Select [Auto White Balance],
[Unchanged] or [Flash] in [12. WB When Using Flash] of the [A Custom
Setting 2] menu (p.89).
White Balance
MENU
CTE
INFO
Auto
Cancel Check OK
OK
To Next Page
Loading...
