175
Using the Flash
5
1
Set the mode dial to b.
2
Use the e-dial to set the shutter speed.
The background is not properly exposed if the aperture value is blinking
when the shutter speed is set. Adjust the shutter speed so that the
aperture value does not blink.
3
Press the K/i button.
The built-in flash pops up.
4
Take a picture.
1
Set the mode dial to e, K or c.
2
Press the K/i button.
The built-in flash pops up.
3
Press the four-way controller (3).
The [Flash Mode] screen appears.
4
Select G or H and press the 4 button.
The shutter speed is set slower to give a proper exposure for the
background.
5
Take a picture.
Using b Mode
Using e/K/c Mode
To Next Page
Loading...
