77
Basic Operations
3
2
Use the four-way controller
(45) to select a flash mode.
Turn the e-dial to perform the flash
exposure compensation. (p.81)
3
Press the 4 button.
The camera is ready to take a picture.
1
Set the mode dial to I, =, q, . or H.
The flash is deactivated when A (Night Scene), K (Sunset), n (Stage
Lighting), Z (Night Scene HDR), U (Candlelight), or E (Museum) is
selected in H (Scene) mode. The built-in flash does not pop up when
set to l (Night Snap) in H (Scene) mode.
2
Press the shutter release button
halfway.
The built-in flash pops up if necessary
and begins charging. When the flash is
fully charged, b appears in the
viewfinder. (p.32)
3
Press the shutter release button fully.
The picture is taken.
Using Auto Flash Discharge Mode C,
i
(Automatic Flash Pop-up)
OK
MENU
0.0
Flash Mode
Cancel OK
Auto Flash Discharge
To Next Page
Loading...
