Pentax K20D User Manual

101
Shooting Functions
4
Set Exposure Steps in [ 2. EV Steps ] in the [A Custom Setting] menu to
increments of 1/2 EV or 1/3 EV.
EV compensation is not available when the exposure mode is set to B
(Green) or p (Bulb) mode.
• The EV compensation cannot be canceled by turning the camera off or by
setting any other exposure mode.
• The EV compensation value is reset to 0 when the Green button is pressed
while holding down the m button.
Changing the Exposure Steps
EV Compensation for a (Hyper-manual) and M
(Flash X-sync speed)
For example, if the EV compensation value is set to +1.5 for a and
M, an underexposure of 1.5EV is displayed on the EV bar. If you set
the exposure value so that the V is displayed at the center of the EV
bar, the image will be captured with the compensated value.
2. EV Steps
Exposure setting steps
are set to 1/2 EV
1/2 EV Steps
1/3 EV Steps
Downloaded From camera-usermanual.com Pentax Manuals

Pentax K20D Specifications

General

Camera Type	Digital SLR
Sensor Type	CMOS
Sensor Size	23.4 x 15.6 mm
Resolution	14.6 MP
Continuous Shooting Speed	3 fps
Image Stabilization	Sensor-shift
Screen Size	2.7 inches
Screen Resolution	230, 000 dots
Storage Media	SD/SDHC
Dimensions	141.5 x 101 x 70 mm
Weather Sealing	Yes
Image Processor	PRIME (Pentax Real Image Engine)
Shutter Speed	30-1/4000 sec
Viewfinder	Optical (pentaprism)
Battery	Rechargeable Lithium-Ion battery
ISO Range	ISO 100 - 3200 (expandable to 6400)