199
Processing Images
8
4
Press the four-way controller (2345) to select the RAW
image to edit and press the 4 button to select the check
box (O).
Press the 4 button again to clear the check box (P).
Turn the rear e-dial toward f to select single-image display and view the
image.
You can select up to 100 images at a time.
5
Press the { button and use the four-way controller (23)
to select [Open].
To specify the parameters, select [Change Setting]. See “Specifying the
Parameters” (p.200).
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller (23) to select [Save as JPEG]
or [Save as TIFF].
Press the 3 button to return to the previous screen. Select [Cancel]
and press the 4 button to return to single-image playback mode.
8
Press the 4 button.
All selected RAW images are edited and saved in a new folder.
Downloaded From camera-usermanual.com Pentax Manuals
To Next Page
Loading...
