Pentax K20D User Manual

206
Printing from the Camera
9
2 Press the four-way controller
(2).
The DPOF screen appears.
3 Press the { button.
The screen for making DPOF settings for
all images appears.
4 Use the four-way controller (45) to choose the number of
copies and whether to insert the date (O) or not (P).
Refer to Steps 4 and 5 of “Printing Single Images” (p.205) for details of
how to make the settings.
5 Press the 4 button.
The DPOF settings for all images are saved and the camera returns to
single-image playback mode.
The number of copies specified in settings for all images applies to all the
images. Before printing, check that the number is correct.
Settings for single images are canceled when settings are made for all images.
00
Copies
All images
A l l i m a g e s
All images
100-0046
100-00 46
100-0046
Date
Fn
OK
O K
OK
OK
00
MENU
Copies
Date
OK
O K
OK
OK
DPOF setting for all
D P O F s e t t i n g f o r a l l
images
i m a g e s
DPOF setting for all
images
Downloaded From camera-usermanual.com Pentax Manuals

Pentax K20D Specifications

General

Camera Type	Digital SLR
Sensor Type	CMOS
Sensor Size	23.4 x 15.6 mm
Resolution	14.6 MP
Continuous Shooting Speed	3 fps
Image Stabilization	Sensor-shift
Screen Size	2.7 inches
Screen Resolution	230, 000 dots
Storage Media	SD/SDHC
Dimensions	141.5 x 101 x 70 mm
Weather Sealing	Yes
Image Processor	PRIME (Pentax Real Image Engine)
Shutter Speed	30-1/4000 sec
Viewfinder	Optical (pentaprism)
Battery	Rechargeable Lithium-Ion battery
ISO Range	ISO 100 - 3200 (expandable to 6400)