Pentax K20D User Manual

211
Printing from the Camera
9
7 Press the { button.
The screen for changing print settings
appears.
8 Select [Paper Size] and press the four-way controller (5).
The Paper Size screen appears.
9 Use the four-way controller
(
2345 ) to choose the paper size.
You can only choose a size that is
supported by your printer.
When [_ Setting] is selected, images
are printed according to the printer
settings.
10 Press the 4 button.
11 Repeat Steps 8 to 10 to set [Paper Type], [Quality] and
[Border Status].
The print settings change screen appears after each item has been set.
When [_ Setting] is selected for these print settings, images are printed
according to the printer settings.
[Paper Type] with more Es supports higher quality paper.
[Quality] with more Es indicates higher print quality.
12 Press the 3 button.
The camera returns to the print settings confirmation screen in Step 6.
13 Press the 4 button.
The image is printed according to the settings.
Press the 3 button to cancel printing.
PictBridge
Paper Size
Paper Type
Quality
Border Status
_ Setting
_ Setting
_ Setting
_ Setting
MENU
Paper Size
Card
8″ ×10″
A4
A3
Letter
11″ ×17″
2L
Postcard
4″ ×6″
L
100×150
MENU
_ Setting
OK
OK
Cancel
Downloaded From camera-usermanual.com Pentax Manuals

Pentax K20D Specifications

General

Camera Type	Digital SLR
Sensor Type	CMOS
Sensor Size	23.4 x 15.6 mm
Resolution	14.6 MP
Continuous Shooting Speed	3 fps
Image Stabilization	Sensor-shift
Screen Size	2.7 inches
Screen Resolution	230, 000 dots
Storage Media	SD/SDHC
Dimensions	141.5 x 101 x 70 mm
Weather Sealing	Yes
Image Processor	PRIME (Pentax Real Image Engine)
Shutter Speed	30-1/4000 sec
Viewfinder	Optical (pentaprism)
Battery	Rechargeable Lithium-Ion battery
ISO Range	ISO 100 - 3200 (expandable to 6400)