peplink ONE One - Page 243


Network>NATMappings.
In this example, the host with an IP address of 192.168.1.102 is bound to 10.90.0.75 of               
WAN1:

ClickSaveandthenApplyChanges,locatedatthetoprightcorner,tocompletethe
process.

InboundAccessRestriction
Scenario
Afirewallisrequiredinordertoprotectthenetworkfrompotentialhackerattacksand
otherInternetsecuritythreats. 
Solution
FirewallfunctionalityisbuiltintothePeplinkBalance.Bydefault,inboundaccessis
unrestricted.Enablingabasiclevelofprotectioninvolvessettingupfirewallrules. 

https://www.peplink.com
243
Copyright@2019Peplink
