Percul Lapcom S Separate 100 - No. 0: Date and Time Setting

No. 0: Date and time setting
Set the current year, month, day, and time.
* The initial screen on the parameter setting is No. 1. To set No. 0, press the MODE
key.
１． The second digit of the year flashes. Press the SET key and enter a number.
２．
Pressing the SHIFT key changes the flashing digit to the first digit of the year. In
the same way, press the SET key and enter a number.
３． Use the same process to set the month, day, and time in sequence.
４． Press the CLEAR key to move to the next screen. To exit the setting, press and
hold the Clear key for 3 seconds.
* Only the last 2 digits of the year are displayed and set. The time is displayed in
24-hour format.
Setting example: 13:55, October 18, 2015
Time
Day
Year Month
Parameter No.
-20-