9) Selecting the Data Item to Display During Driving
The data item for display during driving can be selected as shown below.
SEC Current segment time
1Mpa: Press1 pressure
2Mpa: Press2 pressure
V Alternately displays the battery pack and external battery voltages.
G Lateral G value
G Longitudinal G value
θ Steering angle
m Distance driven
rpm Current RPM
Press the SET key. The currently selected item flashes. Press the SET key until the
item you want to display is flashing. Press the CLEAR key or wait for a few seconds.
Then the flashing stops and the item to display is determined.
Select the item to
display.
Current segment
time is displayed
when “SEC” was
selected.
-51-
To Next Page
Loading...