Percul Lapcom S Separate 100 - No.2: Backlight

No. 2: Backlight * The backlight is an optional.
Set the backlight brightness.
* Press the CLEAR key and display parameter No. 2.
１． The backlight brightness display flashes at the top right of the screen. Press the
SET key and select backlight OFF (0) or ON (1 – 2). 2 is the brightest setting.
２． Press the CLEAR key to move to the next parameter setting. To exit the setting,
press and hold the CLEAR key for 3 seconds.
* When the user changes from the initial screen to the parameter settings screen,
the backlight turns on at its brightest setting for 7 seconds, regardless of the
backlight ON/OFF setting.
Parameter No.
Backlight brightness
-22-