Percul Lapcom S Separate 100 - No.18: Baud Rate

No. 18: Baud rate
When telemetry is operated using radio waves, a cellular phone, the internet, or other,
set the communications speed here.
* Press the CLEAR key and display parameter No. 18.
１． The baud rate display flashes. Press the SET key and select the correct
communications speed setting (96 (9600 bps) – 576 (57600 bps)) for the
communications device used.
２． Press the CLEAR key to move to the next parameter setting. To exit the setting,
press and hold the CLEAR key for 3 seconds.
Parameter No.
Baud rate
-44-