-2-
CONTENTS
1) SAFETY INSTRUCTION for USE 3
2) Checking the Product 4
3) Names of Parts 5
Inserting and removing SD memory card 7
4) Charging the Instrument 8
5) Installation 9
1. Control unit 9
2. Display 10
3. Magnetic sensor 11
4. Pulse lead for RPM 12
5. Wheel speed sensor 13
6. Liquid sensor 13
7. Spark plug temperature sensor 14
8. Intake/exhaust air temperature sensor 14
9. G sensor 15
10. How to connect the external indicator & battery, and the cords 16
11. How to connect to the ECU wheel speed and rpm signal 17
6) Turning the Power On/Off 18
7) Setting of Parameters 19
<Changing the main unit to the parameter setting screen> 19
No.0: Date and time setting 20
No.1: Hour meter, trip meter, and odometer 21
No.2: Backlight 22
No.3: Number of Segments 23
No.4: Sensor Off Timer 24
No.5: Speed Pulse Length 25
No.6: Unit of Speed 26
No.7: Logging start/stop condition 27
No.8: REV Position 32
No.9: Information lamp and bar-graph full scale 33
No.10 & 11: Temperature Alarm 34
No.12 & 13: Pressure Alarm 35
No.14: Calibration for Steering movement 36
No.15: Calibration for Throttle position 37
No.16: Gear position 40
No.17: Logging interval 43
No.18: Baud rate 44
No.19: Time difference with previous lap, best lap, and target lap 45
No.20: Averaging number of speed and RPM data sampling 48
8) Saving and Transferring Parameter Settings 49
Saving the parameters in the main unit to the memory card 49
Transferring the parameters on a memory card to the main unit 50
9) Selecting the Data Item to Display During Driving 51
10) Monitoring Data during Driving 52
11) Reviewing Data from the Display 53
12) How to delete Driving Data 56
13) How to Initialize the Parameter Settings 56
To Next Page
Loading...