Percul Lapcom S Separate 100 - No.20: Averaging Number of Speed and RPM Data Sampling

No. 20: Averaging number of speed and RPM data sampling
The sampling average number for wheel speed and RPM can be set. A smaller
average number yields better responsiveness.
* Press the CLEAR key and display parameter No. 20.
１． The wheel speed sampling average number display flashes. Press the SET key
and enter a number.
２．
Press the SHIFT key and move the flashing part to the RMP sampling average
number display. Press the SET key and enter a number.
３． Press the CLEAR key to move to the next parameter setting. To exit the setting,
press and hold the CLEAR key for 3 seconds.
Averaging number
of RPM sampling
Averaging number of
wheel speed sampling
Parameter No.
-48-