2. In the same way as ②-2., to display the best section time among all laps for the
section No. currently displayed, press and hold the MODE key for 3 seconds.
The (BEST) indicator turns on and the best section time is displayed. Press the
MODE key or SHIFT key to return to the lap time display. (Refer to the figure in
②-2.)
12) How to delete Driving Data
<Erasing the driving data for 1 lap>
1. Verify that [READY] is displayed on the display screen.
2. Press the MODE key or SHIFT key and display the lap data to erase.
3. Press and hold the SET key and CLEAR key at the same time for 3 seconds. The
lap time display changes to [0:00:00] and the data is invalidated.
<Erasing all driving data>
1. Verify that [READY] is displayed on the display screen.
2. Press and hold the SET key and CLEAR key at the same time for 3 seconds. The
display momentarily turns off and all lap data is erased.
13) How to Initialize the Parameter Settings
1. Verify that [READY] is displayed on the display screen. If it is not displayed, press
the CLEAR key to display it.
2. Press and hold the SHIFT key, SET key, and CLEAR key at the same time for 3
seconds. Verify that the display momentarily turns off.
SHIFT
To Next Page
Loading...