Percul Lapcom S Separate 100 - Names of Parts

3) Names of Parts
<Display front>
1. Power lamp
It illuminates when the power of the unit is “ON”.
2. COM port
Connects various communication devices when using telemetry function.
3. Charging monitor lamp
It illuminates during rapid charging of the inner battery with the attached AC adapter.
4. Charging port
Connects the plug of the attached AC adapter.
5. Switch 1/2
It is used when saving the parameter setting in the unit memory into the SD card, and
vice versa.
6. GPS antenna port * This is available for only S Separate 100 Plus.
Connects GPS antenna.
7. REV port
Connects the pulse lead cable for RPM.
8. Speed port
Connects the speed sensor.
9. AXIS port
-5-
Connects the G sensor.