Peri SKYDECK - Page 18

16
MRK / PRK 225
MRK / PRK 201,5
MRK
PRK
62,5
MRK
PRK
62,5
MRK
PRK
75
MRK
PRK
75
125
2250
2015
235 235
MRK / PRK 201,5
MRK / PRK 201,5MRK / PRK 225
625
MRK / PRK 137,5
125
2015
1375 1500
2300
MRK / PRK 201,5 MRK / PRK 201,5
MRK / PRK 201,5
MRK / PRK 150
MRK / PRK 137,5
MRK / PRK 230
MRK / PRK 230
MRK / PRK 150
2250
1500
3750
MRK / PRK 225
MRK / PRK 225
MRK / PRK 150
MRK / PRK 150
750
028390 111811
028400 111812
028380 111813
028350 111814
028460 111815
028360 111816
028470 111817
SKYDECK Panel Slab Formwork
Instructions for Assembly and Use – Standard Configuration
A3 System dimensions
Overview of the required frames:
MRK with the use of MULTIPROP Towers
PRK with the use of PEP Props
Frames
MRK
Item no.
PRK
Item no.
SKYDECK system
– Inset beam at wall beginning with 75 cm panel span.
– Inset prop at wall beginning with Combihead.
– Panel span 75 cm.
– Inset beam at wall beginning with 150 cm panel span.
– Panel span 150 cm.
– Inset prop at wall beginning under SLT 225 with Prophead
or Combihead.
– SLT 225 on Prophead or Combihead.
– Use of Cantilever Beam SLT 375 on Prophead/Combihead
or corner tables.
– SLT 225 on Dropheads.
75 Steel
137.5 Steel
150 Steel
201.5 Alu
225 Alu
230 Alu
62.5 Steel
Table A3.02
Fig. A3.01 Fig. A3.02
Fig. A3.03
SKYDEKC AuV_ex_791458.indb 16 13.12.16 16:54