Peri SKYDECK - A13 Site record

64
............................................................................................................................
............................................................................................................................
............................................................................................................................
= ............................................ cm
= ............................................ m
= ............................................ m
= ............................................ cm
= ............................................
= ............................................ kN
= ............................................ cm
= ............................................ cm
= ............................................ m
= ............................................ m
................................................
................................................
................................................
................................................
= ............................................ kN
A13 Site record
Check whether above assumptions and/or specifications apply
on the construction site
Company:
Project:
Component:
Place Date Site manager in charge
(Signature)
This page is to be copied, filled out and filed in the daily construction records.
Check to be carried out on the construction site before concreting Execution / Installation of the formwork
Slab thickness
Clear room height
Prop length
= clear room height – formwork assembly height
(with Drophead: 41 cm)
Direction of assembly
Max. panel span
Selected prop
Actual prop load
(according to PERI Tables)
≤ zul. Stützenlast
(nach PERI Tabellen)
Inner tube bottom ................
Outer tube bottom ...............
Inner tube bottom ...............
Outer tube bottom ..............
Are all props in both axes in a vertical
position? ≤ 1%
Horizontal support for the formwork
available in all directions?
Mounted parts are obviously
undamaged?
Required bracing has been mounted?
Slab thickness
Max. panel span
Selected prop
Selected prop length
Direction of assembly
yes
yes
yes
yes
SKYDECK Panel Slab Formwork
Instructions for Assembly and Use – Standard Configuration
SKYDEKC AuV_ex_791458.indb 64 13.12.16 16:58