Peri SKYDECK - Filler Plates, Forming Around Columns

76
0.14 0.65 0.71
0.16 0.62 0.69
0.18 0.60 0.68
0.20 0.58 0.65
0.22 0.57 0.64
0.24 0.55 0.63
0.25 0.55 0.61
0.26 0.54 0.61
0.28 0.53 0.60
0.30 0.52 0.59
0.35 0.49 0.58
0.40 0.47 0.56
0.43 0.46 0.54
0.45 0.46 0.53
0.50 0.44 0.52
0.52 0.44 0.51
0.55 0.43 0.51
0.60 0.42 0.50
0.65 0.41 0.49
0.70 0.40 0.48
0.75 0.39 0.47
0.80 0.39 0.46
0.85 0.38 0.46
0.90 0.37 0.45
0.95 0.37 0.45
1.00 0.36 0.44
1.05 0.36 0.44
1.09 0.35 0.43
SRT-2 SPH SRT-2 SPH
0.14 1.14 0.49
0.16 1.01 0.43
0.18 0.90 0.38
0.20 0.81 0.35
0.22 0.74 0.32
0.24 0.68 0.29
0.25 0.65 0.28
0.26 0.63 0.27
0.28 0.59 0.25
0.30 0.55 0.23
0.35 0.47 0.20
0.40 0.41 0.18
0.43 0.39 0.16 1.70 0.72
0.45 0.37 0.16 1.63 0.69
0.50 0.33 0.14 1.48 0.63
0.52 0.32 0.14 1.43 0.61
0.55 1.35 0.57
0.60 1.25 0.53
0.65 1.16 0.49
0.70 1.08 0.46
0.75 1.01 0.43
0.80 0.96 0.41
0.85 0.91 0.38
0.90 0.86 0.37
0.95 0.82 0.35
1.00 0.78 0.33
1.05 0.75 0.32
1.09 0.73 0.31
0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.05 1.09
GT 24 4.61 3.93 3.45 3.12 2.86 2.66 2.51 2.26 2.06 1.97 1.91
VT 20 3.89 3.32 2.92 2.63 2.42 2.22 1.97 1.78 1.62 1.55 1.50
KH 10/16 3.79 3.23 2.84 2.56 2.35 2.10 1.86 1.68 1.53 1.46 1.42
L L
B
e
B
B
B
L/500 = 3 mm L/500 = 1,5 mm
A17 SKYDECK
Filler plates, forming around columns
Perm. width B [m] of the filler plate max. 0.40 m
Filler Timber SPH
or Edge Beam
SRT-2
Filler Timber SPH or
Edge Beam SRT-2
Filler Timber SPH
or Edge Beam
SRT-2
Combihead
SCK
max. 10 cm
Case 1
Case 2
Panel 150 or 75
Case 1
Slab
thickness
d [m]
Fin Ply 21 mm
Spruce 400
parallel/cross
Fin Ply 21 mm
Spruce 400
parallel/cross
Case 2
Perm. width B [m] of the filler plate
Note:
Deflection single span beam B/300.
Panel 150
Slab
thickness
d [m]
Panel 75
Perm. width of influence e
B
[m]
for shuttering columns
Perm. span L [m] of the Edge Main Beams
Beam used
Slab thickness [m]
SKYDECK Panel Slab Formwork
Instructions for Assembly and Use – Standard Configuration
SKYDEKC AuV_ex_791458.indb 76 13.12.16 16:58