Perkins 4.99 - Page 32

CYLINDER HEAD-E.2
E4
4. Uncouple the water outlet connection on the front
of the cylinder head.
5. Remove the air cleaner and place somewhere level
ready for servicing.
6. Disconnect the fuel pipe and electrical connection
to the starting aid located in the induction mani-
fold. (Refer to Fig. E.1).
E5
E6
7. Remove the cylinder head cover togther with the
breather pipe.
8. Unscrew the oil feed pipe to the rocker shaft at
the cylinder head end. (Refer to Fig. E.2 for its
location) .
9. Remove the eight rocker shaft bracket securing
nuts evenly and remove the rocker shaft complete
with the oil feed pipe. (Refer to Fig. E.3).