Operating Controls
16
7.02 Keys on the machine head
The machine sews backwards as long
as the key 1 is pressed during the sew-
ing operation.
The keys 2 can be assigned functions
using parameters “203” and “204”.
(See chapter 11.04 Parameter set-
tings).
The sewing lamp integrated onto the
machine head is switched on and off
with the key 3.
Fig. 7 - 02
7 Operating Controls
7
.01 Main switch
Fig. 7 - 01
1
1
2
3
Before switching on the machine, raise the take-up lever as far as possible.
Turning the main switch 1 switches the
machine on and off.