Pfaff 1591

Input
59
11.02 Examples for setting seam programs
11.02.01 Examples of seam program input using the “Create/correct program”
function
The seam program to be created should
- contain 2 seam zones,
- have a basic stitch length of 2.5 mm and
- be saved under program number “10” With the commend “Seam 1”.
 Switch the machine on.
 Select program number “10”, see chapter 9.06 Selecting a program number.
 Call up input mode.
 Call up the “Create/correct seam program” function.
 Select the desired program number or enter it via the keypad.
 Conclude with the “Enter” function.
 Call up the comment input menu.
 Enter a comment via the keypad and numeric keypad.
 Conclude the comment input.
Seam 1