Pfaff 1591

To Next Page

To Previous Page

Table top cutout

13.02 Table top cutout

Ständerposition

Teile-Nr. 906-3750-000

170

Einschraubmutter DIN 7965 (2x)

Best.--Nr. 12-177 106-05

Anchor nut DIN 7965 (2x)

Order no. 12-177 106-05

Stand position

Part no. 906-3750-000

Main Page

Table of Contents3
Safety6
Directives6
General Safety Instructions6
Safety Symbols7
Special Points of Attention for the Owner-Operator7
Operating Personnel and Technical Staff8
Operating Personnel8
Technical Staff8
Danger Warnings9
Proper Use10
Technical Data11
Pfaff 159111
Pfaff 159312
Disposal of the Machine13
Transportation, Packaging and Storage14
Transport to the Customer's Premises14
Transport Within the Customer's Premises14
Disposal of the Packaging Materials14
Storage14
Work Symbols15
Operating Controls16
Main Switch16
Keys on the Machine Head16
Bobbin Thread Monitoring Using Stitch Counting17
Pedal17
Hand Lever to Raise the Roller Presser18
Swivelling out the Roller Presser18
Knee Switch19
Knee Lever19
Edge Trimmer -725/04 for PFAFF 159120
Control Panel21
Set-Up and Initial Start-Up22
Set-Up22
Setting the Table Height22
Inserting the Sewing Machine into the Stand23
Assembling the Anti-Tipping Device24
Mounting the Fl Ange Motor24
Mounting the Fl Ange Motor on the Bearing Plate24
Mounting the Fl Ange Motor on the Machine25
Mounting the Machine Cover25
Connecting the Plug-In Connections and Ground Cable26
Machine Drive Home Position / Fi Tting the Toothed Belt27
Mounting the Fl Ange Motor Belt Guard28
Connecting the Safety Switch29
Checking the Start Inhibitor Function29
Assembling the Reel Stand30
Initial Start-Up30
Switching the Machine on / off30
Set-Up31
Inserting the Needle31
Winding the Bobbin Thread, Adjusting the Thread Tension32
Removing / Inserting the Bobbin Case33
Inserting the Bobbin Case, Adjusting the Bobbin Thread Tension33
Threading the Needle Thread / Adjusting the Needle Thread Tension34
Selecting a Program Number35
Setting Stitch Lengths36
Entering Start and End Backtacks37
Switching on / Setting the Bobbin Thread Monitoring Using Stitch Counting39
Entering / Changing the Code Number41
Setting the Control Panel43
Inserting and Removing the SD Memory Card44
Sewing45
Manual Sewing45
Sewing with Fi Xed Programs47
Programmed Sewing49
Program Interruption51
Error Messages51
Input52
Entering Seam Programs53
Basic Seam Program Input Settings53
Seam Program Input Via the "Create/Correct Program" Function55
Seam Program Input Via the "Teach-In" Function57
Examples for Setting Seam Programs59
Examples of Seam Program Input Using the "Create/Correct Program" Function59
Example for Seam Program Input Via the "Teach-In" Function61
Managing Seam Programs63
Parameter Settings65
Overview of Parameter Functions65
Example of a Parameter Entry66
List of Parameters for Control P320 and 32167
Error Messages and Description71
Sewing Motor Errors72
Maintenance and Care73
Maintenance Intervals73
Cleaning the Machine73
Oiling the Hook74
Checking the Oil Level of the Hook and Front Parts74
Lubricating the Bevel Gears75
Topping up the Thread Lubrication Oil Reservoir75
- Lubricating the Roller Presser Drive Gear Mechanism (Only for a Diameter of 25 MM and 35 MM)76
Cleaning the Blower Air Fi Lter76
Tilt Base77
- Table Top77
- Table Top Cutout78
Wear and Tear Parts79

Table of Contents

Other manuals for Pfaff 1591

Related product manuals